Silico Tile-Fix Adhesive

Advantages:

• Ready to use and only onsite mixing with water is required
• Better Bond then conventional cement based mortar
• Can be used for both interior & external applications
• Excellent adhesion and slip resistance
• Quick curing and floor can be used after 24 hrs
• Shrinkage cracks are minimized due to its water retaining and self-curing properties

How to Use:

• Ensure that old tiles are perfectly joint and having uniform level. If any hollow space is present same should be filled by the mortar
• Tiles should be rinse with water to remove dust & loose particles
• Take Silico Tile FixWall & Floor Tile Adhesive in a mixing tub, add approx. 5-6 Litres water to make lump free mortar consistency (Adhesive: - water mixing ratio 3:1 by volume)
• Wait for 4 minutes and then mix it with the help of a trowel
• Apply mix material on the surface at 3-5 mm thickness, spread it with the help of notched trowel, do not spread in more than 1sq m of area at a time. Press the tile firmly, hammer gently with soft mallet to ensure perfect bond
• Clean the excessive adhesive from the joints
• Leave the tile applied area untouched for 24 hrs
• Clean the tools & equipment’s with potable water immediately after use

Precautions and Limitations

• Heavy tiles must be supported by mechanical clamps while fixing on the vertical surface
• Always add powder to water and not water to powder
• Do not add more water than recommended
• Do not add sand or cement at site
• Before doing tile-on-tile application, ensure that the original tiling surface in sound condition.
• Strictlynotrecommendedforthedirectuseongypsumplaster,paint,wood,Plastic Substrates & Metal.Consult Technical Dept or CC  Division of Precise Conchem PvtLtd